Products
ATLAS ZBM-05
fine-aggregate mortar for stucco mouldings
- perfect mapping of details
- possible mass staining
- resistant to atmospheric conditions
- possible adjustment of colour
ATLAS ZBM-25
coarse-aggregate mortar for stucco mouldings
- for large mouldings
- rapid-set
- possible mass colouring
- resistant to atmospheric conditions
- possible adjustment of colour
ATLAS ZMP
mortar for drawn mouldings
- for drawn mouldings
- for cornices, bossage and rustication
- contains lightweight fillers
- rapid-set
- resistant to atmospheric conditions
ATLAS KI
silane injection cream
- for injection of walls containing cavities and scratches
- eliminates capillary action of humidity in walls
- hydrophobizes capillaries
- ready to use
ATLAS KS
dual-function liquid injection sealing
- forms secondary structural membrane
- eliminates capillary action in walls
- seals wall structure
- closes capillaries in crystallization process
- hydrophobizes capillaries
- reinforces mineral screeds and floors
ATLAS PLASTERING MORTAR M
for mechanical plastering
- for mechanical application of traditional cement plaster in category 0-III
- high ductility
- increased adhesion to the substrate
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS KB-15
masonry mortar for cellular concrete
- for walls made of cellular and aerated concrete
- for blocks, bricks, hollow blocks
- prevents thermal bridging
- compressive strength – category M5
ATLAS SILMUR
masonry mortars for silicate elements
- four versions with different compressive strengths
- available in white or grey
- very good adhesion to masonry elements
- good workability and ductility
- SILMUR M-15 - also winter version (down to -10 °C)
ATLAS REKORD
white cement top finish
- based on white cement
- for finishing walls and ceilings
- on typical mineral substrates
- contains fine aggregate – up to 0.2 mm
- reinforced microfibers
ATLAS EPO-S
universal epoxy binder
- Pedestrian traffic: after approx. 16 hours
- Compressive strength: minimum 50 MPa
- Flexular strength: minimum 15 MPa
- Adhesion to concrete: approx. 3 MPa
- Mechanical loading: after approx. 3 days
ATLAS PLASTERING MIX
traditional cement plaster, category III
- for plastering of walls made of ceramic, silicate brick, cellular concrete, concrete hollow blocks
- increased bonding
- plasticized, easy to apply
- layer thickness 6-30 mm
- plastering of walls and ceilings
Withdrawn
ATLAS CEMENT BASE COAT
bonding layer for traditional plasters
- improves plaster bonding to the substrate
- recommended beneath cement and cement-lime plasters
- for manual and machine application
Withdrawn
ATLAS LIGHT MACHINE-APPLIED PLASTER
cement-lime plaster, category III
- for manual and machine application
- light – contains perlite
- high yield – up to 14 kg/m²/cm
- smooth – grain size up to 0.5 mm
- easily workable
ATLAS ZW 330
rapid-set levelling mortar
- bonding of tiles after only 5 hours
- no shrinkage cracks (fibre reinforced)
- high mechanical strength
ATLAS MONTER T-5
fast setting assembly mortar
- firmly fixed after 5 minutes
- for fixing steel and plastic parts
- 10 MPa strength after 1 hour
- for sealing point water leaks