ATLAS LIQUID FOIL WODER W
liquid foil
- waterproofing under ceramic tiles
- for bathrooms, kitchens
- flexible, highly adhesive
- single-component
Product description
ATLAS LIQUID FOIL WODER W is designed for waterproofing wet rooms (bathrooms, shower rooms, etc.).
Allows for flexible protection of corners and expansion joints - together with the embedded ATLAS SEALING TAPE AND CORNERS, protects the edges of wall and screed joints and expan-sion joints.
Seals wall and floor surfaces, around water and sewer pipe penetrations - along with embedded floor and wall rings.
It is a coating seal - it forms a layer several millimetres thick, which must be protected against mechanical damage caused, for example, by foot traffic (a protective layer or tile lining is required on the waterproofing).
Allows for flexible protection of corners and expansion joints - together with the embedded ATLAS SEALING TAPE AND CORNERS, protects the edges of wall and screed joints and expan-sion joints.
Seals wall and floor surfaces, around water and sewer pipe penetrations - along with embedded floor and wall rings.
It is a coating seal - it forms a layer several millimetres thick, which must be protected against mechanical damage caused, for example, by foot traffic (a protective layer or tile lining is required on the waterproofing).
Properties
- ATLAS LIQUID FOIL WODER W is produced as a ready-to-use compound based on polymer dispersions, fillers and modifying agents.
It is highly flexible - it can be used on substrates made with underfloor and wall heating systems and other surfaces subject to deformation.
It has high adhesion to typical building substrates - e.g. concrete 2.2 MPa.
It is resistant to crack formation in the substrate - the max-imum crack width at which the coating does not break is > 2.0 mm.
It only requires the contents of the pack to be stirred before use - it is a one-component waterproofing.
Allows gradual consumption over a 12-month period - despite opening the bucket and using part of it, it gives you the opportunity to apply the remainder over the entire shelf life, i.e. 12 months from the date of manufacture.
It is convenient to apply regardless of the nature of the substrate - it is easily applied to plasterboard, OSB as well as cement or gypsum plaster, metal and PVC components.
It allows easy control of the thickness of the layer applied - whether applied by brush, roller or steel trowel.
Provides excellent coverage after the first coat has been applied.
It allows easy - visual - assessment of the uniformity of the applied layer - thanks to the intensity of the colour and the tex-ture after drying.
Main parameters
- Open time: min. 30 minutes
- Drying time: approx. 60 minutes
- Second coat application: after approx. 3 hours
Technical documentation
Here you will find product-related documents and other files for download: