ATLAS HOTER S
adhesive mortar for EPS and XPS
- increased grip
- rapid increase in strength
- good vapour-permeability
- for insulation with ceramic tiles up to 0.36 m²
Product description
In ETICS systems - for bonding thermal insulation boards made from EPS (white and graphite) and XPS boards.
Allows the fixing of polystyrene boards up to 50 cm thick.
Allows XPS boards up to 20 cm thick to be fixed.
It is recommended for insulation work in passive and ener-gy-saving construction and energy-saving construction - helps to achieve the building envelope tightness required in passive construction.
It is a component of thermal insulation systems - it can be used to insulate newly constructed buildings and those undergoing thermal modernisation.
Allows the fixing of polystyrene boards up to 50 cm thick.
Allows XPS boards up to 20 cm thick to be fixed.
It is recommended for insulation work in passive and ener-gy-saving construction and energy-saving construction - helps to achieve the building envelope tightness required in passive construction.
It is a component of thermal insulation systems - it can be used to insulate newly constructed buildings and those undergoing thermal modernisation.
Properties
- ATLAS HOTER S is produced as a dry mixture of the highest quality cement binder, aggregates and modifying agents.
High resistance to microscratch formation - thanks to a spe-cially selected bulk stack of fine fillers and additional structural reinforcement using microfibres.
High durability during use - through the addition of redispersible polymers, microfibres and special additives and modifiers, an in-crease in durability, weather resistance and modifiers, an increase in the durability of the adhesive and resistance to weathering was achieved.
It has high adhesion - due to its increased polymer dispersion content, it exhibits high adhesion to mineral surfaces and to poly-styrene and XPS boards. This parameter is also favourably influ-enced by the varied, tight bulk stack of the aggregate mixture.
It is vapour-permeable.
It has very good application parameters.
Main parameters
- Mixing ratio (water/dry mix): 5.00 ÷ 5.50 l/25 kg
- Pot life: approx. 3 hours
- Open time: min. 25 minutes
Technical documentation
Here you will find product-related documents and other files for download: