News
When others are waiting – You keep on going!
You can easly work in low temperatures – even close to 0° C!
ATLAS STOPTER K-20
2 in 1 – adhesive mortar for polystyrene and XPS and for mesh embedding
Enables work within wide range of temperature – from 0°C during application and down to -5°C within 8 hours since the installation.
✅ Element of composite thermal insulation systems, which have been given both European (ETA) and domestic (AT) technical approvals.
✅ Recommended for insulation of passive and energy efficient buildings.
✅ Installation of various types of polystyrene and extruded polystyrene boards.
ATLAS ESKIMO
setting accelerator for renders and paints
Enables rendering and painting at 0°C and in high air humidity (above 80%).
Use with Acrylic, Hybrid, Silicone, Mosaic renders and Salta N Plus, Salta N, Salta, Salta E paints.
ATLAS PLUS
highly flexible deformable adhesive S1 2-10 mm
Excellent bonding even at 1°C.
✅ Highly flexible – can be applied on deformable substrates.
✅ 3 x greater initial bonding, i.e. ≥ 1.5 N/mm².
✅ Bed depth from 2 up to 10 mm
✅ Extended open time – up to 30 min.
✅ Reduced slip – enables fixing cladding from the top towards the bottom.
ATLAS SILMUR
masonry mortars for silicate elements
Can be used in low temperature – not less than 0 °C during application and not less than -10 °C after 8 hours since the application.
Is recommended for constructing walls of silicate elements (all versions), cellular and aerated concrete (SILMUR M-10, M-7.5 and M-5).