PRIMER UNDER SILICONE RENDERS

FOR INTERNAL AND EXTERNAL USE

USE

ATLAS SILKON ANX is a primer used for substrate preparation under ATLAS SILKON N and R thin-layer silicone renders. It can be used on all even and structurally sound mineral substrates such as concrete, traditional cement plasters, cement-lime plasters, plasterboard panels and reinforced layers in the following thermal insulation systems: ATLAS, ATLAS STOPTER K-10, ATLAS STOPTER, ATLAS HOTER and ATLAS ROKER W-20. It is suitable for indoor and outdoor use.

PROPERTIES

ATLAS SILKON ANX is a ready-to-use priming mass based on quartz flours and organic resin. It is a white priming agent. It is efficient, very convenient and easy to use. Aggregate content enhances surface coarseness, making application of successive layers easier, and increases the contact area of the render with the substrate. Application of ATLAS SILKON ANX improves adhesion and prevents appearance stains on the thin-layer render resulting from inappropriate substrate preparation or its properties.

SUBSTRATE PREPARATION

The substrate should be stable, even and structurally sound i.e. strong enough; it should be free from anything that may weaken adhesion, in particular dust, dirt, lime, oil, fat, wax. Remove existing paint and render coats of insufficient adhesion. Before work commencement, prime the surface using ATLAS UNI-GRUNT. Fill in irregularities and defects using e.g. ATLAS LEVELLING MORTAR or ATLAS PLASTERING MIX.

PRODUCT PREPARATION

ATLAS SILKON ANX primer is ready to use. It may not be combined with other materials, diluted or thickened. Immediately before application, stir in order to achieve homogenous consistency.

APPLICATION

Distribute ATLAS SILKON on prepared substrate (evenly on the whole surface) with a roller or paintbrush. Do not apply the mass below +5°C. Begin surface plastering after the mass completely dries i.e. after ca. 4÷6 hours from its application. The information comprises basic instructions of product application and do not relieve users of responsibility for work in accordance with good construction practice and OHS regulations.

CONSUMPTION

On average, 0.3 kg is sufficient for 1 m2

TOOLS

Roller or paintbrush Wash the tools with clean water directly after use.

PACKAGING

Plaster buckets: 5 kg, 15 kg Pallet: 480 kg in 5 kg buckets, 495 kg in 15 kg buckets.

STORAGE & TRANSPORT

Store and transport in tightly closed buckets in dry conditions, ensuring positive temperature (pallets are particularly recommended). Avoid overheating. Do not leave open containers.

CAUTION

Protect eyes and skin. In case of direct contact with eyes, seek medical attention.

TECHNICAL DATA

Adhesion to concrete – min. 1 MPa Temperature Substrate and ambient temperature during work – from +5°C to +30°C Density – ca. 1.50 g/cm3

CERTIFICATES

The product has been given Hygiene Certificate no. HK/B/0070/02/2004 by the National Institute of Hygiene. ATLAS SILKON ANX is a part of thermal insulation systems of external building walls: - ATLAS ETA 06/0081, EC Certificate of Conformity 1488-CPD-0021 - ATLAS ROKER ETA 06/0173, EC Certificate of Conformity 1488-CPD-0036 - ATLAS STOPTER K-10 AT-15-4947/2004, Certificate of Conformity No. ITB-373/W - ATLAS STOPTER AT-15-3662/2004, Certificate of Conformity No. ITB-374/W - ATLAS HOTER AT-15-6502/2004, Certificate of Conformity No. ITB-0882/W.