WASHING AGENT FOR REMOVAL OF THE REMAINDER OF CEMENT AND LIME MORTARS

FOR INTERNAL AND EXTERNAL USE

USE

ATLAS SZOP is designed for removal of even the oldest remains of various cement and lime mortars, as well as dirt and layers caused by the same. It can be also used to wash the remainder of dirt, deposit and stains caused by minerals contained in water, rust, etc. It is suitable for cleaning ceramic (glazed tiles, terracotta, gres tiles, clinker) and stone tiles, toilets, as well as chromium-coated, varnished, high-quality noble steel or plastic surfaces. It is suitable for indoor and outdoor use.

PROPERTIES

ATLAS SZOP is efficient and effective. Owing to the optimum recipe, it enables quick removal of the oldest dirt. ATLAS SZOP contains mineral acid; therefore cleaning of elements and substrates sensitive to acid, such as marble, enamel etc. using the agent is not recommended. In case of doubt, make a test on the surface using a spot that is not visible.

APPLICATION

At first, slightly soak the places contaminated by products containing cement or lime. Use a brush or a sponge to apply the agent onto contaminated area and to clean the surface afterwards. Depending on substrate parameters, degree and type of contamination, use undiluted or dilute the agent (see the table). Soak the places that are particularly heavily contaminated with undiluted agent. Leave for a few minutes in order to allow the agent to act. Then remove the contamination. Act carefully so as not to apply the agent surfaces where cement or lime should remain e.g. on ceramic tiles with cement joints. Agent application without appropriate dilution may result in unwanted removal of mortar or mortar discolouration. In any case, having finished cleaning, wash the whole surface thoroughly with clean water or a slightly alkaline water solution. Absorptive surfaces can be secured against contamination using ATLAS DELFIN. Thick old remainder of cement mortars such as ATLAS ADHESIVE, ATLAS LEVELLING MORTAR, ATLAS PLASTERING MIX and the like No dilution Cement layers caused by e.g. ATLAS GROUT, ATLAS ADHESIVE and the like 1: 3 to 1: 5 Remainder of dirt and lime 1: 5 to 1: 10 Rust stains and tap water stains 1:10: to 1:15 The information comprises basic instructions of product application and do not relieve users of responsibility for work in accordance with good construction practice and OHS regulations.

TOOLS

Brush or sponge .Wash the tools with clean water directly after use.

PACKAGING

Plastic containers: 1 kg Pallet: 432 kg in 1 kg containers

STORAGE & TRANSPORT

Transport and keep the agent dry in tightly closed original packaging, in temperatures above 0°C. Avoid overheating. Shelf life is 36 months from the production date on the packaging.

CAUTION

Irritant. Protect skin and eyes. Keep out of the reach of children. In case of contact with eyes, immediately rinse them with plenty of water and seek medical attention. In case of direct contact with skin, rinse with plenty of water with soap. In case of ingestion, immediately seek medical attention and show the packaging or label. Do not combine with other cleaning agents, in particular those that contain chlorine.

TECHNICAL DATA

Substrate and ambient temperature during work – from +5°C to +25°C Floor utilisation for further work after priming – after 6 hours Emulsion density – 1.0 g/cm3

CERTIFICATES

The product conforms with PN-C-81906: 2003 and has been given Hygiene Certificate no. HK/B/0577/01/2005 by the National Institute of Hygiene.