ATLAS PLUS

Flexible adhesive for tiles - C2TE S1 type
is suitable for terraces, facades, underfloor heating, plasterboards,
on difficult substrates: terracotta, old glazed tiles, OSB, cement and stone tiles,
on plasters, walls, cement or anhydrite floors
Properties
flexible with increased adhesion possibility of fixing tiles from top of the wall and prolonged open time
Main characteristic
consumption: on average 1.5 kg per 1 m² at 1 mm bed thickness adhesion min. 1.0 N/mm² bed thickeness : from 2 mm to 5 mm

ATLAS PROGRES ELASTYK

Elastic adhesive for gres - stoneware tiles - C2T type
for terraces , floor heating, wooden ceilings,
façades, thin partition walls
Properties
elastic, with increased adhesion
and decreased slip of newly adhered tiles
Main features
consumption: 1.5kg per 1m² with bed thickness of 1mm
adhesion: min. 1.0 N/mm²
bed thickness: 2 - 5 mm

ATLAS PROGRES STANDARD

Adhesive for gres-stoneware tiles - C1TE type
recommended for typical use:
for plasters, rough walls, cement and anhydrite screeds
walls and floors, for outdoor and indoor use
Properties
possibility of tiling from the top of wall
prolonged open time
Main features
consumption: 1.5kg per 1m^² with bed thickness of 1mm
adhesion: min. 0.5 N/mm^²
bed thickness: 2 - 5 mm

ATLAS PROGRES STANDARD WHITE

Adhesive for polished gres-stoneware tiles - C1T type
for plasters, rough walls, cement and anhydrite screeds
for polished gres-stoneware tiles and the ones of increased absorbability
Properties
white cement based, elastic
possibility of tiling from the top of wall
Main features
consumption: 1.5kg per 1m² with bed thickness of 1mm
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 8 mm

ATLAS PROGRES EXPRESS

Fast-setting adhesive for gres-stoneware tiles - C1FTE type
footing on tiles and grouting after 4 hours
suitable for plasters, rough walls, cement and anhydrite screeds
for rooms to be continuously used
Properties
possibility of tiling from the top of wall
prolonged open time
Main features
consumption: 1.5kg per 1m² with bed thickness of 1mm
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm

ATLAS PROGRES MEGA

Elastic adhesive for floor gres-stoneware tiles - C2E type
for terraces, floor heating, wooden ceilings
for gres-stoneware tiles of large size
Properties
elastic, pourable, thick-layer adhesive
for tiling and levelling the substrate,
prolonged open time
Main features
consumption: 1.5kg per 1m² with bed thickness of 1mm
adhesion: min. 0.5 N/mm²
bed thickness: 4 - 20 mm

ATLAS PROGRES MEGA WHITE

Elastic adhesive for polished floor gres-stoneware tiles - C2E type
for terraces, floor heating, wooden ceilings
for polished gres-stoneware tiles of large size
Properties
white, elastic, pourable, thick-layer
for tiling and levelling the substrate,
prolonged open time
Main features
consumption: 1.5kg per 1m² with bed thickness of 1mm
adhesion: min. 1.0 N/mm²
bed thickness: 4 - 20 mm

ATLAS PLASTICISED ADHESIVE

Adhesive for tiles - C1TE type
for fixing tiles in typical situations
for glazed tiles, terracotta, cement and stone tiles
suitable for plasters, walls, cement and anhydrite floors
Properties
possibility of fixing from top of the wall and prolonged open time
Main characteristic
coverage: 1.5 kg/1 m²/1 mm of bed thickness
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm

ATLAS MIG

Fastbonding adhesive - C1FTE type
allows light foot traffic on tiles and grouting in 4 hours after fixing
applied in rooms that have to be continuously used
for plasters, walls, cement and anhydrite floors
used for glazed tiles, terracotta, cement and stone tiles
Properties
possibility of fixing from top of the wall and prolonged open time
Main characteristic
consumption: 1 kg/1 m²/ 1 mm bed thickness
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm

ATLAS INTER

Adhesive for internal use - C1T type
for tiling in typical situations
on plasters, walls, cement and anhydrite floors
used for glazed tiles, terracotta, cement and stone tiles
Properties
possibility of tiling from top of the wall
Main characteristic
consumption: 1.5 kg/1 m²/ 1 mm bed thickness
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm

ATLAS LEVELLING MORTAR

General-purpose mortar
for quick patching/levelling of typical substrates
for filling cavities, smoothing and masonry
for plasters, walls, cement and anhydrite screeds
under tiles, plasters and smoothing
Properties
tiling is possible after 5 h (with the layer thickness of 1 cm)

Main characteristic
consumption: 1.6 kg/ 1 m²/1 mm of layer thickness
layer thickness: from 2 - 15 mm

ATLAS ARTIS GROUT

Fastbonding grout - CG2 ArW type
terraces, façades, underfloor heating, plasterboards
suitable for glazed tiles, terracota, gres tiles, cement and stone tiles
Properties
fastbonding, flexible, abrasion resistant
long lasting colour, with reduced water absorption
protected against mildew, algae
Main characteristic
consumption: 0.3 kg/1 m²/3 mm wide for tiles 300x 300 mm
joint width: 1 - 25 mm

ATLAS GROUT FOR THIN JOINTS

Grout - CG2 ArW type
terraces, façades, underfloor heating, plasterboards
for glazed tiles, terracota, gres tiles, cement and stone tiles
Properties
flexible, abrasion resistant, coloured
reduced water absorption, for thin joints
Main characteristic
consumption: 1 kg/2 m²/3 mm joint width for 150x150 mm size tiles
joint width: 1 - 6 mm

ATLAS ELASTYK

Flexible adhesive (2-10 mm) -C2T type
-recommended for difficult conditions i.a. deformable substrate, bad weather conditions
-for difficult substrate (e.g. terrazzo)
-for fixing tiles: of small, medium and large size,
medium and low absorptive, ceramic (glazed, terracote, gres-porcelain, clinker, mosaics) and stone ones, etc.
Properties
• high flexibility
• for glazed tiles, terracotta, gres-porcelain tiles
• for floor and wall heating
• for difficult substrates – i.a. plasterboards
Main parameters
consumption: 1.5 kg/1 m2/1 mm
bed thickness: 2 - 10 mm
high adhesion: ≥ 1 N/mm2

ATLAS GROUT FOR WIDE JOINTS

Grout – CG2 ArW type
for glazed tiles, terracota, gres tiles, cement and stone tiles
Properties
abrasion resistant, coloured
reduced water absorption, for wide joints
Main characteristic
consumption: 1.0 kg/1 m²/6 mm joint width for 300x300 mm size tiles
joint width: 4 - 16 mm

ATLAS POURABLE GROUT

Grout - CG2 ArW type
terraces, underfloor heating
for terracota, gres tiles, cement and stone tiles
Properties
pourable, abrasion resistant, coloured
reduced water absorption, for thin and wide joints
Main characteristic
consumption: 0.6 kg/1 m²/6 mm joint width for 300x300 mm size tiles
joint width: 2 - 50 mm

ATLAS FUGERO

Mineral grout renovator
for discoloured, dirty or faded grouts
for changing colours of new or existing grouts
suitable for ceramic, cement or stone tiles

Properties
high adhesion to mineral grouts
high degree of coverage and abrasion resistance
Main characteristic
consumption: 250 ml/15 m²/3 mm joint width for 300x300 mm size tiles
drying time: ca 2h

ATLAS SILTON S

Coloured sanitary silicone
for grouting ceramic, cement and stone tiles
for insulation and filling expansion joints
Properties
resistant to mildew,algae, UV rays and ageing
adhesive to: ceramic, glass, porcelain, china,
faience and enamelled elements
Main characteristic
consumption: 280 ml/11 rm of joints of 4 x 6 mm in cross-section
pot life: up to ca. 5 min

ATLAS EDGE AND TILE TRIMS

Finishing strips of PVC and aluminium
for external and internal corners
for tiles edges, for edge protection of stairs and landings
ceramic, cement and stone tiles
Properties
fasten and facilitate tile fixing
protect tile edges against chipping
cover the edges of cut tiles

ATLAS PLUS WHITE

White adhesive of high flexibility -C2TES1 type
for fixing tiles of high absorption
on plasters, walls, cement and anhydrite screeds
for home water-pools, shower cabins,
balconies, terraces, facades, fire-places,
underfloor and wall heating
Properties
high elasticity, increased adhesion to substrate,
for difficult substrates
Main characteristic
consumption: 1.5 kg/1 m2 with 1 mm bed thickness
bed thickness : from 2 to 5 mm
bond strength : min. 1.0 N/mm2

ATLAS PLUS MEGA

Deformable adhesive S1 for large size tiles- C2E S1 type
-2 in 1: fixing tiles and levelling substrate, - for terraces, floor heating, wooden ceilings, - for difficult substrates: OSB, terrazzo.
Properties:
-pourable, thick-layer, -highly deformable S1 class, -highly flexible, -extended open time, - filling excellent the space under the tile
Main parameters:
consumption: 1.5 kg/1m2/1mm of bed thickness,-bed thickness: 4-20 mm, -increased adhesion- min. 1.0 N/mm2

ATLAS PLUS EXPRESS

deformable adhesive S1, fast-setting -C2FTE type
-recommended for quick refurbishment,- footing and grouting after 4h,-for balconies and facades,-for floor and wall heating,-for difficult substrates: terrazzo, OSB, existing tiling
Properties:
-short time of setting, -highly flexible, -enables tiling form the top of wall, -extended open time
Main parameters:
consumption: 1.5 kg/1m2/1 mm of bed thickness; bed thickness: 2 - 5 mm; increased adhesion: min. 1.0 N/mm2

ATLAS ARTIS EPOXY GROUT

Two-component epoxy grout - RG type
for grouting of ceramic glazed tiles, terracotta,
cement and stone tiles;
for kitchens, garages, laboratories,
for terraces, swimming-pools, floor heating.
Properties:
extended long-term colours,
protected agains algae and fungi,
0% of water absorbtion; extreme hardness,
resistant to mechanical and chemical influence.
Main parameters:
0.6kg/1m2/5 mm for tiles of 300 x 300 mm in size,
joint width: 1 - 10 mm

ATLAS ARTIS STYLE GROUT

Grout with glitter effect - CG2 ArW type
floor and wall heating, plasterboards
for: mosaics, glazed tiles, terracotta, stoneware tiles,
stone and cement tiles, glass blocks
Properties
contains glittering particles,
fastbonding, flexible, abrasion resistant,
extended durability of colours, low absorptive,
protected against growth of algae and fungi,

Main parameters
consumption: 0.3 kg/1 m2/3 mm joint width (for 30x30 cm tiles size)
width of joint: from 2 to 25 mm

SANITARY SILICONE ATLAS ARTIS

Coloured sanitary silicone
for grouting the cladding of ceramic, stone and cement tiles,
for sealing expansion joints

Properties
expanded long-term colours
protected against algae and fungi
with excellent adhesion to ceramic, glass, porcelain, china and enemalled elements
Main parameters
consumption: 280 ml/11 rm of 4 x 6 mm cross-section